Methyl Hydroxyethyl Cellulose CAS#9032-42-2
Powerful Thickening & Water Retention Capacity: High-purity non-ionic cellulose ether with strong thickening efficiency, high water retention and excellent sag resistance, ensures full cement or gypsum hydration, extends open time and improves adhesion, crack resistance and green strength of tile adhesive, putty and render.
Excellent Rheology & Formulation Compatibility: Provides pronounced pseudoplastic flow that balances levelling, anti-sagging and trowelling smoothness, compatible with cement, gypsum, fillers, redispersible polymer powder, starch ether and superplasticizers, with high salt tolerance and a gel temperature of 60~90 ℃ for stable performance in hot climates.
Stable Free-Flowing Powder Form for Convenient Transport: White to off-white odorless powder with low bulk density, 98 % passing 100 mesh and low moisture, packed in 25 kg PE-lined paper bags, easy to dose and dry-blend, stable for 24 months in sealed dry storage.
Methyl hydroxyethyl cellulose is a high-demand cellulose ether thickener raw material, non-dangerous goods and wide coverage of dry-mix mortar, water-based coating, detergent and oil drilling application scenarios.
Chemical & Physical Properties
| Property | Value |
|---|---|
| Melting point | Not applicable (polymer powder); thermal gelation at 60~90 ℃ in aqueous solution, ignition temperature 360 ℃ |
| Density | 1.28~1.30 g/cm³ (20 ℃); bulk density 0.30~0.60 g/cm³ |
| Storage temp | Sealed warehouse below 30 ℃, protect from humidity, pressure and direct sunlight; shelf life 24 months |
| Solubility | Soluble in cold water forming a clear colloidal solution; insoluble in hot water, ethanol, acetone and toluene; solubility not affected by pH |
| Form | White to off-white powder / granule, 98 % passing 100 mesh, moisture ≤5 % |
| Color | White to off-white |
| Odor | Odorless, tasteless |
| PH Value | 5.0~8.0 (2 % aqueous solution) |
| Hygroscopicity | Hygroscopic; absorbs moisture and cakes if bags are left open in humid air |
| Stability | Stable in sealed bags below 30 ℃; viscosity drops above the gel point, avoid moisture, high temperature and long-term stacking pressure |
| EINECS No. | Polymer (no single EINECS number) |
| CAS DataBase Reference | 9032-42-2 |
Safety Information
| Item | Value |
|---|---|
| Hazard Codes | Not classified (nuisance dust) |
| Risk Statements | Dust may cause mild irritation to eyes and respiratory tract |
| Safety Statements | S22; S26: Do not breathe dust, in case of contact with eyes rinse immediately with plenty of water |
| UN Number | Not regulated |
| Hazard Class | Not dangerous goods |
| Packing Group | Not applicable |
| Flammability | Non-flammable (combustible organic powder, avoid dust accumulation) |
| HS Code | 39123900 |
Main applications: Ceramic tile adhesive and tile grout (C1/C2, large-format tile); wall putty and skim coat; cement and gypsum plaster, render and masonry mortar; self-levelling floor compound; external insulation and finish systems (EIFS/ETICS); waterproof and repair mortar; joint filler and sealant; water-based latex paint and printing ink thickener; wallpaper and wood adhesives; liquid detergent and personal care thickener; oil-well drilling fluid viscosifier and fluid-loss reducer.






